Spa Care

Spa Start-Up: Brominating Concentrate

 

First Time Start-Up

  1. Fill your spa with water. If the make-up water is from a well or other nonmunicipal source, testing prior to filling is recommended.
  2. Super-oxidize the spa with SpaGuard® Brominating Concentrate with spa circulation system turned on. Run all pumps at least one cycle.
  3. Operate the spa circulation system for at least 2 hours.
  4. Drain, then rinse interior surfaces and refill. Follow draining instructions in owner's manual. The reason for doing this is because spas are tested with water and when they are shipped there is some water in the plumbing. By super-oxidizing with a sanitizer during a pre-fill, you lessen the opportunity to contaminate the water with bacteria.

Refill Guide

  1. Once spa is filled start your spa. Add SpaGuard Stain and Scale Control.
  2. Apply SpaGuard Water Clarifier and circulate water for 5 minutes.
  3. Adjust pH (7.2-7.6), total alkalinity (125-150 ppm) and calcium hardness* (100-200 ppm).
  4. Use SpaGuard Spa Sentry following the recommendations on your SpaGuard computerized water analysis. If source water is greater than 300 ppm, please consult your BioGuard Dealer.
  5. Apply SpaGuard Brominating Concentrate following label directions. Establish proper bromine residual of 3-6 ppm.
  6. Add SpaGuard Natural Spa Enzyme once a bromine residual of 3-6 ppm is established.

Daily Care

  • Test the bromine residual. Apply SpaGuard Brominating Concentrate as needed to maintain proper residual.
  • If foaming occurs use SpaGuard Anti-Foam.

Weekly Care

  • Test the pH. Acceptable range is 7.2-7.6. Ideal range is 7.4-7.6.
  • Test total alkalinity of the water. Proper range is 125-150 ppm.
  • Apply SpaGuard® Natural Spa Enzyme and Stain and Scale Control following label directions.
  • Shock your spa with SpaGuard Enhanced Shock or Spa Shock.

Monthly Care

  • Test calcium hardness.*
  • Chemically clean your filter with SpaGuard® Filter Cleaner.

As Needed

  • Drain, clean, polish and refill based on usage.
  • Apply SpaGuard Spa Sentry following label directions every 60 days or upon refill, whichever is more frequent.

* If using Spa Sentry there is no need to check calcium hardness.